No.
5.
Save/print the trace and add it to the acceptance report (refer to the example below)
6.
Deselect SLS and acknowledge Safety messages
No Safety faults and alarms (r0945[0...7], r2122[0...7], r9747[0...7])
•
r0046.0 = 1 (drive in "switch-on inhibit" state)
•
Acknowledge "switch-on inhibit" and run the drive
Check the drive is moving
Example trace SLS with STOP A
Figure 10-4
Example trace: SLS with STOP A
Safety Integrated
Function Manual, 05/2010, A5E03264275A
Description
Acceptance test and acceptance report
10.5 Acceptance tests
Status
283