Responding To Alert Messages - Zoom H3-VR Operation Manual

Responding to Alert Messages

If one of the messages below appears, follow the instructions to respond to it.
Alert messages that appear during startup
Message
Date/Time Reset
Alert messages that appear when using batteries
Message
Low Battery!
No Battery Charge!
Alert messages that appear when the Recording Screen is open
Message
Cannot Create File!
Card Full!
File Number Limit Reached!
No SD Card!
Mark Limit Reached!
Invalid SD Card!
Now Recording!
SD Write Error Mark
Explanation and response
The date and time setting was initialized. Reset the time (
and time" on page 95).
Explanation and response
The remaining battery charge has become low. Replace the batteries with new
ones or connect the AC adapter.
When the battery charge becomes low, this appears before the power turns off
automatically. Replace the batteries with new ones or connect the AC adapter.
Explanation and response
The maximum number (500) of folders and files that can be created on the same
level of the microSD card has been reached. Delete unneeded folders and files or
record to a different location.
The microSD has become full. Delete unneeded data or replace it with a new
microSD card.
The file number limit (999) has been reached.
No microSD card is loaded. Load a microSD card.
The maximum number of marks (99) in one file has been reached.
The SD card is invalid. Formatting the card with the
usable.
The power cannot be turned off during recording. Stop recording before turning
the power off.
A writing error occurred because the writing speed to the microSD card was
insufficient. We recommend using a microSDHC/SDXC card that has been con-
firmed to operate with this recorder. A list of confirmed microSDHC/SDXC cards
can be checked on the ZOOM website (www.zoom.co.jp).
112
"Setting the date
might make it