Table of Contents
Advertisement
Operation manual
INTRODUCTION
Thank you for purchasing a G9SR Safety Relay. This manual contains information
required to use the G9SR Safety Relay. Please thoroughly read and understand this
manual before you use the G9SR Safety Relay.
Intended Audience
This manual is intended for the following personnel, who must also have knowledge of
electrical systems (an electrical engineer or the equivalent).
•
Personnel in charge of introducing Factory Automation (FA) and safety systems
into production facilities
•
Personnel in charge of designing FA and safety systems
•
Personnel in charge of managing FA facilities
•
Personnel who have the qualifications, authority, and obligation to provide
safety during each of the following product phases: mechanical design,
installation, operation, maintenance, and disposal
WARNING!
WARNING!
Manual Configuration
Information on the operation of G9SR Safety Relays is provided in this manual. There
are no related manuals.
Read and Understand this Manual
Please read and understand this manual before using the product. Please consult your
OMRON representative if you have any questions or comments.
The G9SR system must be installed, configured, and incorporated
into a machine control system by a sufficiently trained and
qualified person. An unqualified person may not be able to
perform these operations properly, which may result in serious
injury.
All actions that change the setup, modify the settings of switches
or involve testing must be managed. These actions may cause
serious injury when applied incorrectly.
G9SR
VII
Advertisement
Table of Contents
