Error Situations - Leds G9Sr-Bc - Omron G9SR Series Operation Manual

Operation manual
6.5.2 Error situations - LEDs G9SR-BC□-□
1.
2.
3.
4.
5.
Page 24 of 79
LED signal Pattern
Description
Error on EDM input
Error during cyclic test.
Error because other module is
connected when G9SR-BC is
configured with input loop.
DIP switch settings incorrect.
Error on solid state safety
outputs (overload).
ERR and RES fast blinking
(3 per sec.) = communication
error of another unit
ERR and RES slow blinking
(1 per sec.) = communication
error of this unit
G9SR