Operation manual
2.3.4
G9SR-BC□-□ solid state output
! In accordance with EN-61131-2 G9SR-BC□-□ outputs are not
Caution
compatible with type 1 inputs.
! In accordance with EN-61131-2 G9SR-BC□-□ outputs are
Caution
compatible with type 2 and type 3 outputs with an external
load < 1Kohm.
2.4
Step 4: Configure the G9SR units
The switches on the units are used to set the function of the safety control system.
Set the switches to achieve the desired behaviour of your system.
See also:
§ 6.3 Dip switches and functions of G9SR-BC□-□ on page 20.
§ 7.3 Dip switches and functions of G9SR-AD□-□ on page 27.
§ 8.3 Rotary switch functions of G9SR-EX□-T90-□ on page 34.
2.5
Step 5: Test the installation
Check all functions of the installed system.
See also:
Section 3 Test on page 7
Document the test results using the test log.
See also:
Chapter 12 Appendix B: Logging of test results on page 77
Page 6 of 79
G9SR