System Configuration Settings - Graco Reactor 2 H-30 Operation

USB Data
Job Job Job Log Log Log
The job log file name is 2–JOB.CSV and is stored
in the DATAxxxx folder.
The job log maintains a record of data points based on
the USB Log Frequency defined in the Setup screens.
The ADM stores the last 237,000 data points for
download. See Advanced Setup Screens, page
for information on setting the Download Depth and
USB Log Frequency.
• Data point date
• Data point time
• A side temperature
• B side temperature
• Hose temperature
• A side temperature set point
• B side temperature set point
• Hose temperature set point
• Pressure A
• Pressure B
• A side inlet pressure (Elite only)
• B side inlet pressure (Elite only)
• A side inlet temperature (Elite only)
• B side inlet temperature (Elite only)
• Inlet pressure set point
• System lifetime pump cycle counts
• Usage Volume (manual)
• Pressure, volume, and temperature units
• Job name/number
Daily Log Log
Daily Daily Log
The daily log file name is 3–DAILY.CSV and is stored
in the DATAxxxx folder.
The daily log maintains a record of the total cycle
and volume sprayed on any day that the system is
powered up. The volume units will be the same units
that were used in the Job Log.
The following data is stored in this file:
• Date that material was sprayed
• Time — unused column
• Total pump cycle count for day
• Total volume sprayed for day
70
System Software System System Software Log Software
The system software file name is 4–SYSTEM.CSV
and is stored in the DATAxxxx folder.
The system software log lists the following:
• Date log was created
37,
• Time log was created
• Component name
• Software version loaded on the above component
Blackbox Log Log File
Blackbox Blackbox Log
The black box file name is 5–BLACKB.CSV and is
stored in the DATAxxxx folder.
The Blackbox log maintains a record of how the
system runs and the features that are used. This log
will help Graco troubleshoot system errors.
Diagnostics Log
Diagnostics Diagnostics
The diagnostics file name is 6–DIAGNO.CSV and is
stored in the DATAxxxx folder.
The Diagnostics log maintains a record of how the
system runs and the features that are used. This log
will help Graco troubleshoot system errors.
System Configuration Configuration Settings
System System Configuration
The system configuration settings file name is
SETTINGS.TXT and is stored in the DOWNLOAD
folder.
A system configuration settings file automatically
downloads each time a USB flash drive is inserted
into the ADM. Use this file to back up system
settings for future recovery or to easily replicate
settings across multiple systems. Refer to the
Upload Procedure, page 71
to use this file.
Log Log
File
File
Log File File
Log File
Settings
Settings
for instructions on how
334945J