Advanced Setup Screens - Graco Reactor 2 H-30 Operation

Advanced Setup Setup Screens
Advanced Advanced Setup
Advanced setup screens enable users to set units, adjust values, set formats, and view software information
for each component. Press
desired Advanced setup screen, press
complete press to exit edit mode.
NOTE: Users must be out of edit mode to scroll NOTE: NOTE:
through the Advanced setup screens.
Advanced Screen Screen 1 1 1 — — — General
Advanced Advanced Screen
Use this screen to set the language, date format,
current date, time, setup screens password (0000 –
for none) or (0001 to 9999), and screen saver delay
(zero equals screen saver off).
Advanced Screen Screen 2 2 2 — — — Units
Advanced Advanced Screen
Use this screen to set the temperature units, pressure
units, volume units, and cycle units (pump cycles or
volume).
334945J
Screens
Screens
to scroll through the Advanced setup screens. Once in the
to access the fields and make changes. When changes are
General
General
Units
Units
Advanced Display Module (ADM) Operation
Advanced Screen Screen 3 3 3 — — — USB
Advanced Advanced Screen
Use this screen to enable USB downloads/uploads,
enable a logs 90% full advisory, enter the maximum
number of days to download data, enable specifying
date range of data to download, and how frequently
USB logs are recorded. See
Advanced Screen Advanced Advanced Screen 4 4 4 — — — Software Screen
This screen displays the software part number.
The software versions for the Advanced Display
Module, Hydraulic Control Module, Temperature
Control Module, USB Configuration, Load Center and
Remote Display Module can be found by pressing
the search soft key
USB
USB
USB Data, page 69.
Software Software
.
37