Adm Display Details; Navigating The Screens - Graco Reactor 2 H-30 Operation

Advanced Display Module (ADM)
ADM Display Display Details Details
ADM ADM Display Details
Power Up Up Screen Screen
Power Power Up Screen
The following screen appears when the ADM is
powered up. It remains on while the ADM runs
through initialization and establishes communication
with other modules in the system.
Menu Menu Menu Bar Bar Bar
The menu bar appears at the top of each screen.
(The following image is only an example.)
Date Date and Date and Time and Time Time
The date and time are always displayed in one of
the following formats. The time is always displayed
as a 24-hour clock.
• DD/MM/YY HH:MM
• YY/MM/DD HH:MM
• MM/DD/YY HH:MM
Arrows Arrows Arrows
The left and right arrows indicate screen navigation.
Screen Screen Screen Menu Menu Menu
The screen menu indicates the currently active
screen, which is highlighted. It also indicates the
associated screens that are available by scrolling left
and right.
24
System Mode Mode
System System Mode
The current system mode is displayed at the lower
left of the menu bar.
System Errors System System Errors Errors
The current system error is displayed in the middle of
the menu bar. There are four possibilities:
Icon Icon Icon Function Function Function
No Icon
No information or no error has occurred
Advisory
Deviation
Alarm
See Troubleshoot Errors, page 67
information.
Status Status Status
The current system status is displayed at the lower
right of the menu bar.
Navigating the Navigating Navigating the Screens the Screens Screens
There are two sets of screens:
• Run Run Screens Run Screens – control spraying operations and Screens
display system status and data.
• Setup Setup Screens Setup Screens Screens – control system parameters and
advanced features.
Press on any Run screen to enter the Setup
screens. If the system has a password lock, the
Password screen displays. If the system is not locked
(password is set to 0000), System screen 1 displays.
Press on any Setup screen to return to the
Home screen.
Press the Enter soft key
function on any screen.
Press the Exit soft key
Use the other soft keys to select the function adjacent
to them.
for more
to activate the editing
to exit any screen.
334945J