Recipes; Cellular Screen - Graco Reactor 2 H-30 Operation

Recipes

Recipes Recipes
Use this screen to add recipes, view saved recipes,
and enable or disable saved recipes. Enabled
recipes can be selected at the Home Run Screen. 24
recipes can be displayed on the three recipe screens.
Add Recipe Recipe
Add Add Recipe
1. Press and then use
recipe field. Press
(maximum 16 characters). Press
old recipe name.
2. Use to highlight the next field and use the
number pad to enter a value. Press
334945J
to select a
to enter a recipe name
to clear the
to save.
Advanced Display Module (ADM) Operation
Enable or or or Disable Enable Enable Disable Recipes Disable Recipes Recipes
1. Press and then use
recipe that needs to be enabled or disabled.
2. Use to highlight the enabled check box.
Press to enable or disable the recipe.

Cellular Screen

Screen
Cellular Cellular Screen
Use this screen to connect the Reactor 2 App to the
Reactor, to determine the cellular signal strength, or
to reset the Reactor Key.
Reset Reactor Reactor Key Key
Reset Reset Reactor Key
Resetting your Reactor Key prevents other users
from remotely changing or viewing Reactor settings
without first reconnecting to the Reactor.
1. On the Reactor ADM Cellular Screen, press
to reset the Reactor key.
2. Press to confirm resetting the Reactor key.
3. Reconnect your app to the Reactor. See your
Reactor 2 App installation manual.
NOTE: After resetting your Reactor key, all operators
NOTE: NOTE:
using the Graco Reactor 2 App must reconnect to
the Reactor.
NOTE: NOTE: For security of wireless control, change the NOTE:
Reactor key on a regular basis and whenever there
is a concern about unauthorized access.
to select the
39