Control Interface Setup And Maintenance; Enable Usb Data; Usb Logs; System Configuration Settings File - Graco HydroShield WMBH00 Instructions - Parts Manual

Air-assisted batch waterborne isolation systems

Table of Contents

Control Interface

Interface Setup

Control

Interface

Enable USB

USB Data

Data

Enable

USB

Data

If the system is configured with USB capability, be

sure that the Enable USB Downloads/Uploads setting

is enabled on

Advanced Screen 3, page

downloaded from the USB are put in a DOWNLOAD

folder on the drive.

For example: "E:\GRACO\12345678\DOWNLOAD\"

The 8-digit numeric folder name matches the 8-digit

serial number on the control interface. When

downloading from multiple controllers, there is one

sub-folder in the GRACO folder for each control

interface.

USB Logs

Logs

USB

Logs

During operation, the control interface stores system

and performance related information to memory in

the form of log files. It maintains two types of log

files: an event log and system logs. To retrieve log

files, see

Download System Data, page

Event Log

Log

Event

Log

The event log file name is 1-EVENT.CSV and is

stored in the DOWNLOAD folder.

The event log maintains a record of the last 1,000

events. Each event record in the log file contains the

date and time the event occurred, the event type,

event code, and event description.

System Log

Log

System

Log

The system log file name is 2-SYSTEM.CSV and is

stored in the DOWNLOAD folder.

The system log maintains a record of all control

interface modules connected to the system. Each

event record in the log file contains the date, time,

software part number, and software version.

3A7370B

Setup and

and Maintenance

Maintenance

Setup

and

Maintenance

System Configuration

System

The system configuration settings file name is

SETTINGS.TXT and is stored in the DOWNLOAD

42. All files

folder.

A system configuration settings file automatically

downloads each time a USB flash drive is inserted.

Use this file to back up system settings for future

recovery or to easily replicate settings across multiple

systems. For instructions on how to use this file,

see

For the location of the USB port on the control

module, see

Retrieve the SETTINGS.TXT file after all system

settings are set as desired. Store the file for future

use as a backup in case the settings are changed

and need to be quickly changed back to the desired

setup.

36.

Custom Language

Custom

The custom language file name is DISPTEXT.TXT

and is stored in the DOWNLOAD folder.

A custom language file automatically downloads each

time a USB flash drive is inserted. If desired, use this

file to create a user-defined set of custom language

strings to be displayed within the control interface.

The control interface is able to display the following

Unicode characters. For characters outside of this

set, the system displays the Unicode replacement

character, which appears as a white question mark

inside of a black diamond.

• U+0020 - U+007E (Basic Latin)

• U+00A1 - U+00FF (Latin-1 Supplement)

• U+0100 - U+017F (Latin Extended-A)

• U+0386 - U+03CE (Greek)

• U+0400 - U+045F (Cyrillic)