Fw Upgrade Screens; Latest Firmware Check - ZyXEL Communications NAS326 User Manual

The following table describes the labels in this screen.
Table 88 Control Panel > System > Date/Time > Daylight Saving Time
LABEL
Enable daylight
saving
Auto daylight
saving
Manual Daylight
Saving
Start Date
End Date
Offset
Apply
Reset

9.6 FW Upgrade Screens

Use this screen to upgrade the NAS firmware. You should first have downloaded the latest firmware files
from the Zyxel website.
Do not turn off the NAS while it is upgrading the firmware or you may
render it unusable.

9.6.1 Latest Firmware Check

Click Control Panel > System > FW Upgrade to open the following screen. Latest Firmware Check allows
you to check the latest firmware version and perform the upgrade.
Chapter 9 Control Panel: System
DESCRIPTION
Select this option to use daylight saving time.
Select this option to have the NAS automatically retrieve Daylight Saving Time settings from
the Internet. The NAS will download a new daylight saving resource file from the Internet
every month.
Daylight saving is a period from late spring to fall when many countries set their clocks ahead
of normal local time by one hour to give more daytime light in the evening.
Select this option to manually enter Daylight Saving Time settings.
Configure the day and time when Daylight Saving Time starts if you selected Enable Daylight
Saving. The hour field uses the 24 hour format. Here are a couple of examples:
Daylight Saving Time starts in most parts of the United States on the second Sunday of March.
Each time zone in the United States starts using Daylight Saving Time at 2 A.M. local time. So in
the United States you would use March, Second, Sunday, at 2:00.
Daylight Saving Time starts in the European Union on the last Sunday of March. All of the time
zones in the European Union start using Daylight Saving Time at the same moment (1 A.M.
GMT or UTC). So in the European Union you would select March, Last, Sunday. The time you
specify depends on your time zone. In Germany for instance, you would type 2 because
Germany's time zone is one hour ahead of GMT or UTC (GMT+1).
Configure the day and time when Daylight Saving Time ends if you selected Enable Daylight
Saving. The o'clock field uses the 24 hour format. Here are a couple of examples:
Daylight Saving Time ends in the United States on the first Sunday of November. Each time
zone in the United States stops using Daylight Saving Time at 2 A.M. local time. So in the United
States you would select November, First, Sunday, at 2:00.
Daylight Saving Time ends in the European Union on the last Sunday of October. All of the
time zones in the European Union stop using Daylight Saving Time at the same moment (1
A.M. GMT or UTC). So in the European Union you would select October, Last, Sunday. The time
you specify depends on your time zone. In Germany for instance, you would type 2 because
Germany's time zone is one hour ahead of GMT or UTC (GMT+1).
Specify by how many hours to change the time for Daylight Saving Time.
Click this to save your changes. If you configured a new time and date, Time Zone and
Daylight Saving at the same time, all of the settings take affect.
Click this to restore your previously saved settings.
NAS Series User's Guide
152