Log Report Configuration Screen - ZyXEL Communications NAS326 User Manual

Figure 151 Control Panel > Service > Maintenance > Log
The following table describes the labels in this screen.
Table 107 Control Panel > Service > Maintenance > Log
LABEL
Refresh
Purge all Logs
Report Config
The screen always shows all logs by default. Choose a specific log category to view logs for just that category.
#
Time
Class
Severity
Message

11.4.1 Log Report Configuration Screen

In the Log screen, click Report Config to do the following:
• Use the Email Setting screen
the NAS.
• Use the Report Setting screen
receive through e-mail and schedule when the NAS e-mails the alerts.
Chapter 11 Control Panel: Maintenance
DESCRIPTION
Click this to update the log display.
Click this to erase all logs from the NAS.
Click this to open a screen where you can configure email alerts for logs. Refer to
on page 183 to see the screens for this.
This is the log entry's number in the list according to the currently selected sort order.
This shows the date and time the log was created. Click the top of the column to sort by oldest or
newest.
This displays the log category; see
This displays how serious the log is rated by the NAS. See
information.
This displays a description of the log. Click the top of the column to sort by alphabetical or
reverse alphabetical order.
(Section 11.4.2 on page
(Section 11.4.3 on page
NAS Series User's Guide
Table 111 on page 190
Table 112 on page 190
184) to enable and configure e-mail alerts from
185) to select the type of alerts you want to
183
Section 11.4.1
for details.
for more