Pyload - ZyXEL Communications NAS326-2T User Manual

13.9 pyLoad

Use this screen to configure the NAS so you can use pyLoad to manage your downloads, including
those from one-click hosting sites.
Click pyLoad on the Desktop or the Launch button in the App Center screen to open the following
screen.
Figure 185 pyLoad
The following table describes the labels in this screen.
Table 130 Applications > pyLoad
LABEL
Get Started
Enable pyLoad
Username
Password
Password (Confirm)
Port Number
Apply
Reset
Chapter 13 App Center and Packages
DESCRIPTION
This is available only when you select Enable pyLoad and click Apply.
Click this button to go to the pyLoad management login screen.
Select this to have the NAS manage your downloads. Clear it to turn the feature off.
Only the admin account can log into the pyLoad management screen.
You can configure a separate password for using the admin account to access the NAS's
pyLoad management screen.
Type the same password again to make sure you entered it correctly.
Set the pyLoad management page's port number. The range of valid port numbers is
1024~65536. Include this port number after the IP address when manually entering the
pyLoad management login page's address in your browser's address bar. For example,
192.168.1.2:7272.
Click this to save your changes.
Click this to restore the screen's last-saved settings.
NAS Series User's Guide
230