Configure The Ip Filter Settings - ZyXEL Communications NAS326 User Manual

Table 135 Download Service > Download Service > Preferences > P2P download (continued)
LABEL
Keep Sharing While
Apply
Reset
Cancel

14.3.4 Configure the IP Filter Settings

Use this screen to enable or disable IP filtering for P2P downloads. IP filtering blocks IP addresses known
to share fake files. You can either get an IP filter table from a website or use your own table.
Click Download Service > Download Service > Preferences > IP Filter to open the following screen.
Figure 191 Download Service > Download Service > Preferences > IP Filter
Chapter 14 Download Service
DESCRIPTION
With P2P download, the NAS starts sharing a file while you are downloading it. Set how long
to continue sharing a file after the NAS finishes the download.
Select Upload/Download Ratio to keep sharing a file until the NAS has uploaded a specific
percent compared to the download.
Select Seeding Time to keep sharing a file for a specific number of minutes after the
download finishes.
Continuing to share a file helps other P2P download users finish downloading it. Sharing out
at least as much as you download helps keep you in good standing in the P2P download
community.
Enter -1 to share a file indefinitely. Leave both check boxes blank to have the NAS stop
sharing the file as soon as the download finishes.
If you select both options, the NAS keeps sharing a file until both conditions exceed the
values you configure. For example, you entered 150% in the Upload/Download Ratio field
and 120 minutes in the Seeding Time field. The NAS keeps sharing a file until it has shared 1.5
times the size of the file and has passed 120 minutes.
Click this to save your changes.
Click this to restore your previously saved settings.
Click this to return to the previous screen without saving.
NAS Series User's Guide
240