Web Configurator; Chapter 3 Web Configurator; Overview; Access The Nas Web Configurator - ZyXEL Communications NAS326-2T User Manual

3.1 Overview

This chapter describes how to access the NAS web configurator and provides an overview of its screens.
The web configurator is an HTML-based management interface that allows easy NAS setup and
management using an Internet browser.
Use Internet Explorer 11.0.9, Mozilla Firefox 31.0, Safari 5.1.7, Google Chrome 37.0.2, or later versions of
these browsers. The recommended screen resolution is 1440 by 900 pixels or higher.
In order to use the web configurator you need to allow:
• Web browser pop-up windows from your device. Web pop-up blocking is enabled by default in
Windows XP SP (Service Pack) 2.
• JavaScript (enabled by default).

3.2 Access the NAS Web Configurator

This guide uses the NAS326 screens as an example. The screens may vary slightly for different models.
Make sure your NAS is properly connected and that your computer is in the same subnet as the NAS
1
(refer to the Quick Start Guide or the appendices).
Open your web browser and type in the server name of the NAS. The default is "nas" followed by the
number of your model ("nas326" for example). Configure the server name of your NAS using the Control
Panel > System > Server Name screen
2.3.5 on page
Figure 17 NAS URL
The default user name and password are "admin" and "1234" respectively. Enter your user name and
2
password. See
stay logged in (assuming you do not log out), make sure you keep your computer secure from
unauthorized access. Click the arrow to log in. Logging in with a (non-administrator) user account takes
you to a different Desktop screen (see

Web Configurator

(Section 9.4 on page
23) of the NAS Starter Utility.
Chapter 7 on page 104
NAS Series User's Guide
C
148) or the System Setting screen
for how to create other user accounts. If you use the option to
Section 3.3 on page 30 for details).
26
H A P T E R
3
(Section