3/2013
General inforrmation
Connect the lines with the enclosed small screwdriver to prevent damaging the device.
!
Please observe that no line will be clamped below the spacer at the backside of the
front-door station.
Connectiong
1. Strip the cable ends.
2. Connect the lines depending on the type of system and according to the wiring diagram.
2-wire special operation
In this operation mode, only one front-door station can
be connected!
One P-wire is to be built by a jumper between termi-
nal a and P.
Note: The front-door station is not working, if the jumper is set
at b.
TCS TürControlSysteme AG, TCS Hotline Germany: +49 (0) 41 94 - 9 88 11 88
Fax: +49 (0) 41 94 - 9 88 129 E-Mail:
7
Connect the lines
hotline@tcsag.de
Subject to technical changes.
PI_PAK_uk 1A