Installe Modules Into The Front Panel (Special Design); Installation Flush-Mount Kit Zau200X; Installation Flush-Mount Box - TCS AMI Series Product Information

01/2013
Installation display module AMI1010x see product information Functional group with
!
display module > installation, page 8.
Installation of the modules into the front panel (special design)
When using a thinner front panel (1.5 to 2.5 mm) the thickness must be increased to 3 mm
spacer (enclosed in the delivery when modules are ordered individually).

Installation flush-mount box

rear view
TCS TürControlSysteme AG, TCS Hotline Germany: hotline@tcsag.de
Fax: +49 (0) 41 94 / 9 88 129  www.tcsag.de

Installation flush-mount kit ZAU200x

drilling for
lock screws
cable gland
9
1
 Put 1 to 3 spacer foils (2) from
2
behind on the front panel onto the
welded bolts (1).
 Put on the module unit (4) with the
3
front panel sealing (3).
 Fix the module unit with 4 fas-
4
tening screws (5) (enclosed in the
5
delivery).
 Loosen the lock screws with the enclosed al-
len key and remove the front panel from the
flush-mount box.

Insert the supply cable through the cable
gland into the flush-mount box and fasten it.
 Insert the flush-mount box into the prepared
wall niche.
Note: The flush-mount box must be flush with
the wall of the house.
Not enclosed: Screws and dowels to fix
!
the post in the wall niche.
Subject to technical changes.
PI_AMI1xx00_uk