Settings; Connect The Pc Keypad; Set The Display Contrast; Set The Volume - TCS K30001 Product Information

01/2013

Connect the PC keypad

 To loosen the covering you need an allen key SW 3 (not included in the delivery).

Set the display contrast

Set the volume

 This function can only be used when a voice connection is already established. It is
used to set the volume of microphone and loudspeaker.
 The volumes should be set only after you have entered the resident data.
For setting and programming you need a standard PC keypad with PS/2 connection
!
(not enclosed in the delivery)!
The volumes are set on an average value ex works. A modification is not always neces-
sary. Please ensure when setting the volumes: The enhancement of loudspeaker and mi-
crophone cannot be set independently from each other. If the volumes are too high, a
feedback effect appears (whistling).
TCS TürControlSysteme AG, TCS Hotline Deutschland: +49 (0) 41 94/ 9 88 11 88
FAX: +49 (0) 41 94/ 9 88 129  Mail: hotline@tcsag.de
15

Settings

With the buttons F11/F12 the contrast of the display can be set in
48 steps:
Reduce the contrast
 Repeat pressing the F11 button on the PC keypad until the required
contrast is adjusted.
The font appears brighter.
Increase the contrast
 Repeat pressing the F12 button on the PC keypad until the required
contrast is adjusted.
The font appears darker.
ex works: middle position
Subject to technical changes.
PI_K30001-30004_uk 1A