Figure 4-6 G5 Alignment Pin; Figure 4-7 G5 Hex Driver Insertion - Garmin G5 Installation Manual

4.1.2.2 G5 Installation
The G5 is installed by inserting the alignment pin located at the top of the unit into the mating hole in
the mounting ring, pushing the unit flush with the instrument panel, and fastening the captive 3/32" hex
socket head screw to the mounting ring as shown in Figure 4-6. To fasten the captive screw to the
mounting ring, insert a 3/32" hex drive tool through the access hole in the front cover of the G5 as
shown in Figure 4-7. Torque the captive mounting screw to 10-12 in-lbs.
Garmin G5 Electronic Flight Instrument Part 23 AML STC Installation Manual

Figure 4-6 G5 Alignment Pin

Figure 4-7 G5 Hex Driver Insertion

Page 47
190-01112-10
Rev. 21