Garmin G5 Installation Manual page 152

Config Page
Navigation
Units
RS-232
ARINC 429
Exit Configuration Mode
GNC 255 Configuration
5.13.2
Config Page
Sys Configuration
NAV Configuration
SL30 Configuration
5.13.3
Config Page
Sys Configuration
Attitude Configuration
Note 1: Set configuration values and units to match the values indicated in the appropriate AFM and
document settings in the space provided.
Note 2: If the aircraft has no AFM set the values as determined by the existing placards, instrument bugs
or instrument markings.
Note 3: Existing placards related to airspeed limitations must be retained.
Note 4: Setting can remain at default setting, not supported in this configuration.
Note 5: The "Selected Course" will display when only one navigator is interfaced to the G5.
Garmin G5 Electronic Flight Instrument Part 23 AML STC Installation Manual
Config Option
Navigation Data
Selected Course
Selected Course 1
Selected Course 2
VNAV Deviation Scale
Altitude
Distance
Airspeed
Vertical Speed
Pressure
Input Format
Output Format
Output 1
Output 2
Input 1
Input 2
Input 3
Input 4
Config Option
RS 232 Serial Port
CDI Indicator
ARINC 429
Config Option
RS 232 Serial Port
Indicator Type
Page 152
Configuration Setting
Disabled
Note: Only used if an autopilot is configured.
If an autopilot interface is configured, this
configuration page is set to ENABLED by default.
Enabled (5)
(6)
(6)
(4)
(1)(2)
(1)(2)
(1)(2)(3)
(1)(2)
(1)(2)
Garmin VHF NAV Radio
Garmin VHF NAV Radio
None
None
Garmin VOR/ILS (SDI 1)
(If GNC is #1 Navigator)
None
Garmin VOR/ILS (SDI 2)
(If GNC is #2 Navigator)
None
Configuration Setting
IO Mode = NMEA
Serial (If GNC255 is installed as #1 navigator)
Or
None (If GNC255 is installed as #2 navigator)
Tx = Low
SDI =
VOR/ILS 1 (If GNC is #1 Navigator)
Or
VOR/ILS 2 (If GNC is #2 Navigator)
Configuration Setting
No Setting
TYPE = Serial
190-01112-10
Rev. 21