Section 1 Installation Manual; Installation Information; G5 Overview; Inventory Of Materials - Garmin G5 User Manual

SECTION 1 INSTALLATION MANUAL

1.1 INSTALLATION INFORMATION

1.1.1 G5 OVERVIEW

The G5 is an electronic instrument display capable of operating as a standalone flight
display or a fully integrated backup instrument for G3X systems. It features a bright,
sunlight readable, 3.5-inch color display which is sized to fit in a standard 3-1/8-inch
instrument cutout. With integrated attitude/air data sensors and GPS, the G5 replaces
traditional electromechanical standby instruments by combining essential information
into one easy-to-read display. The G5 additionally provides backup autopilot control
allowing coupled GPS approaches to be flown or continued in the event of primary
flight display shutdown. In the case of aircraft power loss, the optional battery backup
sustains the G5 flight display with up to 4 hours of emergency power. Two G5 units
installed in the same aircraft will communicate with one another and with the G3X
system.

1.1.2 INVENTORY OF MATERIALS

This manual provides all of the mechanical and electrical information required for
the installation of the G5. This manual is intended to be a step-by-step guide to the
installation, therefore it is important that the steps in all sections be performed in
order. All materials that are required/optional for the installation of the G5 are listed
in this section (as such, some of the information in this section is repeated in following
sections).
Before beginning the G5 installation, it is recommended that the installer perform a
complete inventory of all materials listed in this section (some materials are optional
and may not be applicable to the installation). Section 1.1 should be used to verify
that all components ordered from Garmin have been delivered correctly, and to identify
any required materials that are not provided by Garmin.
190-02072-00 Rev. B Garmin G5 User's Manual
Installation Manual
1