A.5 GTP 59
PIN
WH
BL
OR
A.5.1 OAT Sensing
The GTP 59 is an OAT sensing device. The connection to this LRU is made via pre-installed lead wires,
if they are not long enough to reach the GAD 13, crimp splices can be used to extend the lead wire to the
GAD 13. The pre-installed lead wires are ten feet in length. For specific wiring information, refer to
Section 5.
Garmin G5 Electronic Flight Instrument Part 23 AML STC Installation Manual
Figure 6-12 GTP 59
WIRE
TEMP PROBE POWER IN
TEMP PROBE OUT HI
TEMP PROBE OUT LO
This area intentionally blank
Page 225
I/O
IN
OUT
OUT
190-01112-10
Rev. 21