Garmin G5 Installation Manual page 166

Config Page
Navigation
Units
RS-232
ARINC 429
Exit Configuration Mode
GPS 175/GNC 355 Configuration
5.17.2
Config Page
Interfaced Equipment - ARINC 429
Interfaced Equipment – RS 232
Main System
Main Indicator (Analog)
GNX 375 Configuration
5.17.3
Config Page
Interfaces - ARINC 429
Garmin G5 Electronic Flight Instrument Part 23 AML STC Installation Manual
Config Option
Navigation Data
Selected Course
Selected Course 1
Selected Course 2
VNAV Deviation Scale
Altitude
Distance
Airspeed
Ground Speed
Ground Track
Vertical Speed
Pressure
Input Format
Output Format
Output 1
Output 2
Input 1
Input 2
Input 3
Input 4
Config Option
ARINC RX Port (x)
(x represents any available ARINC 429 Port)
ARINC TX Port 1
SDI
Port (x)
(x represents any available RS-232 Port)
Composite CDI
Selected Course
Config Option
ARINC RX Port (x)
(x represents any available ARINC 429 Port)
ARINC TX Port 1
Page 166
Configuration Setting
Enabled
Note: If an autopilot interface is configured, this
configuration page is set to ENABLED by default.
Enabled (5)
(6)
(6)
(4)
(1)(2)
(1)(2)
(1)(2)(3)
(1)(2)
Magnetic
(1)(2)
(1)(2)
MapMx
None
EFIS / AIRDATA 1 (SDI 1)
(Only used with no autopilot or Garmin autopilot
interfaced )
EFIS / AIRDATA 2 (SDI 1)
(Always used when Non-Garmin Autopilot is interfaced )
EFIS / AIRDATA 1 (SDI 1)
(Only used with no autopilot or Garmin autopilot
interfaced )
EFIS / AIRDATA 2 (SDI 1)
(Always used when Non-Garmin Autopilot is interfaced )
Garmin GPS (SDI 1)
(If GPS/GNX is #1 navigator)
None
Garmin GPS (SDI 2)
(If GPS/GNX is #2 navigator)
None
Configuration Setting
Speed = Low
Format = GDU Format 1
Speed = Low
Format = GAMA Format 1
LNAV1 (If GPS is #1 navigator)
LNAV2 (If GPS is #2 navigator)
MapMX (Format 1)
Disabled
Allowed
Configuration Setting
Speed = Low
Format = EFIS/Air Data
Speed = Low
Format = GAMA Format 1
Or
190-01112-10
Rev. 21