Figure 3-7 Gad 29B Inline Transformer Mounting Instructions - Garmin G5 Installation Manual

Figure 3-7 GAD 29B Inline Transformer Mounting Instructions

G5 Resistor and Diode installation
3.4.11
There are two methods of component installation for the required resistors:
•
Method A should be used for resistor installations utilizing 120Ω CAN cable and shielded
twisted-pair cable MIL-C-27500 installations that do not use the G5 as a CAN bus terminator, see
Figure 3-8 and Figure 3-9.
•
Method B should be used for resistor installations that use the G5 as a terminator and are utilizing
shielded twisted-pair cable, MIL-C-27500, see Figure 3-10 and Figure 3-11.
•
Figure 3-8 and Figure 3-13 show the buildup and installation requirements for the G5 power
diode. This does not depend upon what type of wire is used for the CAN bus.
Garmin G5 Electronic Flight Instrument Part 23 AML STC Installation Manual
Page 37
190-01112-10
Rev. 21