Garmin G5 Installation Manual page 128

Electronic flight instrument, part 23 aml stc
Hide thumbs Also See for G5:
Table of Contents

Advertisement

Config Page
Exit Configuration Mode
GTN 6XX/7XX Configuration
5.8.2
Config Page
ARINC 429
RS-232
Main Indicator (Analog)
Configuration
VOR/LOC/GS Configuration
Vertical Navigation Configuration
(Only used when VNAV function is
enabled and when GTN has
software version 6.50 or later)
Main System
Garmin G5 Electronic Flight Instrument Part 23 AML STC Installation Manual
Config Option
Output 2
Input 1
Input 2
Input 3
Input 4
Config Option
ARINC 429 In (x)
(x represents any available ARINC 429 Port )
ARINC 429 In (x)
(x represents any available ARINC
429 Port )
(Only used when Non-Garmin
Autopilot is interfaced and installed GTN
software version is prior to V6.60)
ARINC 429 Out (x)
(x represents any available ARINC 429 Port)
ARINC 429 Out (x)
(x represents any available ARINC 429 Port)
SDI
RS-232 (x)
(x represents any available RS-232 Port)
CDI Key
Selected Course for GPS
Selected Course for VLOC
V-Flag State
Nav Radio
ARINC 429 Configuration
VNAV
Transition to Approach
VDI Scale
Heading Source Input
Page 128
Configuration Setting
EFIS / AIRDATA 1 (SDI 1)
(Only used with GTN 6XX/7XX and GNS 4XX(W) /
5XX(W) with no autopilot or Garmin autopilot interfaced)
EFIS / AIRDATA 2 (SDI 1)
(Always used with GNS 480 and GTN 6XX / 7XX and
GNS 4XX(W) / 5XX(W) when Non-Garmin Autopilot is
interfaced)
Garmin GPS (SDI 1)
(If GTN/GNS is #1 navigator)
Garmin VOR/ILS (SDI 1) (4)
(If GTN/GNS is #1 navigator)
Garmin GPS (SDI 2)
(If GTN/GNS is #2 navigator)
Garmin VOR/ILS (SDI 2) (4)
(If GTN/GNS is #2 navigator)
Configuration Setting
Speed = Low
Data = EFIS Format 2
Speed = Low
Data = GAD Format 1
(Only used when Non-Garmin Autopilot is
Interfaced and installed GTN software version is
prior to V6.60)
Speed = Low
Data = GAMA Format 1
Speed = Low
Data = GARMIN 429
(Only used when VNAV function is enabled and
when GTN has software version 6.50 or later)
Speed = Low
Data = ARINC 429
LNAV1 (If GTN is #1 navigator)
LNAV2 (If GTN is #2 navigator)
Output = MapMX Format 1
Enabled
Allowed
Allowed
Normal
Enabled (4)
Tx Speed = Low
SDI =
VOR/ILS 1 (If GTN is #1 navigator)
VOR/ILS 2 (If GTN is #2 navigator)
Enabled
Disabled
500Ft
Not Connected
This selection is made only if the GTN being
interfaced to has no other Heading input.
or
Or
Or
190-01112-10
Rev. 21

Advertisement

Table of Contents
loading

Table of Contents