Figure 6-6 Example Emc Source/Victim Matrix - Garmin G5 Installation Manual

c. For each VHF NAV radio, monitor one local frequency, one remote (far field) frequency,
and one unused frequency.
d. Make sure there are no guidance errors.
e. Make sure there are no audio tones that interfere with the station ID.
f. For each GPS Navigator, enter a simple flight plan and display as appropriate. i.e.
Navigator Display, G5, HSI, CDI etc., if installed.
g. Make sure there are no guidance errors.
9. Make sure all other avionics properly function.
G5 #1
G5 #2
(If installed)
GMU 11
(If installed)
GAD 29/29B
(If installed)
GAD 13
(if installed)
Magnetic
Compass
Clock
OAT Indicator
Power Plant
Instruments
Autopilot / SAS
Navigation
Radio(s)
Communication
Radio(s)
Engine Relight
Fuel Valve
Pitot Heat
Pulse Light
Generator
Pos Lt
Anti Coll Lt
Ldg Lts
Gov RPM Incr /
Decr
Eng Deicing
Hyd System
Radar Altimeter
TAS/TCAS
Transponder
Audio Panel
GTX 3X5
<add
equipment
here>
Garmin G5 Electronic Flight Instrument Part 23 AML STC Installation Manual

Figure 6-6 Example EMC Source/Victim Matrix

Page 214
VICTIM
190-01112-10
Rev. 21