Garmin G5 Installation Manual page 130

Note 4: Not applicable to GPS navigators that has no VHF Navigation output. Reference Note 5 in
Figure 5-9.
Note 5: Setting can remain at default setting, not supported in this configuration.
Note 5: The "Selected Course" will display when only one navigator is interfaced to the G5.
Note 6: "Selected Course 1" and "Selected Course 2" will display when dual navigators are interfaced. If
GTN/GNS is navigator #1, "Selected Course 1" is set to "Enabled". If GTN/GNS is navigator #2,
set "Selected Course 2" to "Enabled".
Garmin G5 Electronic Flight Instrument Part 23 AML STC Installation Manual
This area intentionally blank
Page 130
190-01112-10
Rev. 21