Appendix B Specifications - Interlogix FlexZone Series Product Manual

Appendix B
Specifications
Model
PCB dimensions (L x W)
Quantity
Enclosure
Cable entry ports
Probability of detection
Maximum sensor cable
length
Power consumption
Power input
Connectors
Controls
Inputs
FlexZone™ Product Guide
Processor card and enclosure
13.2 x 14.5 cm
One processor per two sensor cables
IP66/NEMA 4 painted aluminum, outdoor rated
L x W x D 26 cm (+2.5 for cable glands) x 16 cm x 9 cm.
•
4 small cable ports (17 mm) fitted with 9.5 mm compression glands:
cable range: 2.9-7.9 mm
•
1 large cable port fitted with compression gland: cable range:
4.3−11.4 mm
95% with a 95% confidence factor for cutting the fence, lifting the fence
fabric, or climbing over the fence unaided (based on a high quality chain link
fence, and following manufacturers' installation and calibration
recommendations)
300 m max. cable length - appr. 10% less for linear fence coverage - 270 m
2.0 W nominal; 2.5 W nominal with network interface card
•
12 to 48 VDC (nominal)
•
absolute minimum 10 VDC
•
absolute maximum 60 VDC
•
min. 38 VDC input required for power over sensor cables and auxiliary
power output capability
•
removable terminal block for power input
•
removable terminal block for relay output connections
•
removable terminal block for auxiliary input/self-test connections
•
removable terminal block for sensor cable input
•
USB port for UCM connection
•
20-pin socket for network interface card
•
micro SD card slot to record sensor response data to removable media
Calibration adjustments via the Universal Configuration Module (Windows-
based software application)
•
2 sensor cable inputs (1 per zone)
•
2 voltage sensing auxiliary device/self-test inputs
91