Interlogix FlexZone Series Product Manual page 93

Chapter 4: Maintenance
3. Select the Current Active radio button to specify that the Current configuration
be used.
4. Select the Browse button.
5. Navigate to the location of the XDU file.
6. Select and open the FlexZoneMSP_2.00.XDU file.
Note: If the MSP firmware is updated first (before the FPGA firmware), it will then
be impossible to upgrade the FPGA firmware. In this case, you must reload MSP
version 1.00 and then start over; updating the FPGA firmware first.
FlexZone™ Product Guide
87