Lan - TP-Link TD-W8960N User Manual

Type the new value for the WAN Interface whose MAC Address you want to change.
You can select corresponding WAN Interface from the drop-down list and click
current PC MAC.
Click Restore Default

Note:
Only the WAN Ports can use MAC Address Clone function. All the clone MAC addresses must not be
the same with each other.
4.3.4

LAN

Go to Advanced Setup
router's LAN ports settings.
IP Address: Enter the router's local IP Address, then you can access to the web

management page via the IP Address, the default value is 192.168.1.1.
Subnet Mask: Enter the router's Subnet Mask, the default value is 255.255.255.0.

to restore the WAN Interface's default MAC Address.
→ LAN, and you will see the LAN screen which allows you to configure the
24
TD-W8960N User Guide
Clone to clone your