Before You Begin; Compressed Liquid/Gas Sample Cylinder Safety; Check Ventilation Condition; Tools And Parts Required For Installation - Agilent Technologies 8860 User Manual

3 Installation for 8860 GC and 8890 GC

Before you begin

Before you begin

Compressed liquid/gas sample cylinder safety

The Gasifier assists in the handling of high pressure liquid and gas samples. Make sure you are
familiar with the safe use of compressed sample cylinders.

Check ventilation condition

For safety and environmental protection, make sure the waste coming out of the gasifier and GC
vent connects to the ventilation system.

Tools and parts required for installation

• Torx T-20 screwdriver, 1 pcs
• 5/16 inch wrench, 2pcs
• Earthing pipe, P/N G3535-20038, 1pcs
• Gasifier mounting bracket, P/N G3535-00032, 1pcs
• Screws M4*8, P/N 0515-2113, 3pcs
• Screws M4*40 (long), P/N 0515-2195, 1pcs
• Screws M4*18 (short), P/N 0515-3034, 2pcs
• Cable Clamp, P/N 1400-1820, 2pcs
• Washer, P/N 2190-0599, 4pcs
• Union, P/N 0100-0124, 1pcs
• Filter Kit, P/M G3535-60008, 1pcs
• USB Cable, P/N 8121-3060, 1pcs
• Core Ferrite, P/N 9170-2626, 1pcs

Check compatibility to the GC system

The gasifier accessory installs on top of the front inlet. It is not compatible with:
• An ALS tray
• An injector mounted in the back position
• Any other accessory that installs over the back inlet
Hardware
The gasifier assumes the use of a gas sampling valve and valve box. If not present, install and
verify proper operation before installing the gasifier.
20 Agilent 8860, 8890, and 990 Micro GC Gasifier User Manual