Specifications - Agilent Technologies 8860 User Manual

2 Introduction

Specifications

Specifications
Table 2
Feature
General
Operation temperatures
Sample input pressure/purge pressure
Delivery pressure to GC
Repeatability
Concentration range
Sample carry-over
Size
Weight
Electrical supply
Storage Environmental Requirements
Operating Environmental
Requirements
The Gasifier is intended for indoor use. Protect the Gasifier from corrosive chemicals, gases,
NOTE
dust, or particulate accumulation. The Gasifier should also be protected from the direct venting
from air conditioners, heaters, furnaces, or fans.
Agilent 8860, 8890, and 990 Micro GC Gasifier User Manual
Specifications
Specifications
Heated pressure-reducing regulator.
Regulator 150 °C +/- 1 °C
Transfer line 100 °C +/- 1 °C
1,000 psi / 7,000 kPa maximum
12 +/- 2.5 psi at 25 °C using 80 psi N
to 30 ml/min with vent closed.
8890: C2~C5 ≤1%, C6+ ≤2%
8860: ≤2%
990: C2~C5 ≤1%, C6+ ≤2%
50 ppm to 100%
< 1% (500 ppm hexane after N
transfer line flow 20 ml/min)
149.5 mm × 94.5 mm × 112.2 mm (length × width × height)
1.8 kg
12 V, 65 W maximum
With 8890/8860:
• Humidity: 5% to 95% RH (noncondensing)
• Temperature: –40 to +70 °C
With 990:
• Humidity: 10% to 95% RH (noncondensing)
• Temperature: –40 to +70 °C
With 8890/8860:
• Humidity: 5% to 95% RH (noncondensing)
• Temperature: 15 to +35 °C
• Maximum altitude: 4,615 meters above sea level
With 990:
• Humidity: 10% to 95% RH (noncondensing)
• Temperature: 0 to +50 °C
• Maximum altitude: 2,000 meters above sea level
as calibration gas and output flow adjusted
2
purging 2 minutes with vent flow 150 ml/min,
2
15