Agilent Technologies 8860 User Manual page 21

3 Installation for 8860 GC and 8890 GC
Check compatibility to the GC system
Firmware and software
The gasifier requires GC firmware version 2.1.x or greater. To check the GC firmware version:
8890: At the touchscreen, go to Settings > About.
8860: The firmware version is displayed at the bottom of the home screen.
To get the latest firmware version or the Agilent GC Firmware Update Utility, visit the Agilent web
site at www.agilent.com, or contact your Agilent service representative.
If using an Agilent Chromatography Data System, such as OpenLab, the gasifier requires
GC Drivers version 3.3 or greater. Update the GC Drivers in the data system before beginning.
The driver will support connection to/communication with the following platforms:
• OpenLab CDS 2.1-2.5 (VL)
• OpenLab ChemStation C.01.07-C.01.10 (VL)
• OpenLab CDS EZChrom A.04.06-A.04.09 (VL&COMPACT)
• GC/MS MassHunter Acquisition B.10.0
• EZChrom Elite 3.3.2 SP2
Agilent 8860, 8890, and 990 Micro GC Gasifier User Manual 21