1
Safety Information
Shipping Instructions
Shipping Instructions
Follow these steps to prepare your Gasifier for shipping:
1 Let the Gasifier cool down for at least 30 minutes before packing.
2 Cap every inlet and outlet port.
3 Cap all inlet and outlet tubing.
4 Always include the power cord kit and USB cable with the Gasifier.
Cleaning Instructions
To keep the Gasifier surface clean, refer to the remarks given below:
•
Switch the GC off.
•
Remove the GC power cable from the mains.
•
Disconnect the Gasifier power cable.
•
Use a soft (not hard or abrasive) brush to carefully brush away all dust and dirt.
•
If the outer case is dirty, clean it with a soft, clean cloth dampened with mild detergent. Never
clean the inside.
•
Never use alcohol or thinners to clean the Gasifier. These chemicals can damage the case.
•
Do not get water on the electronics components.
•
Do not use compressed air to clean.
Disposal Instructions
Disposal of the Gasifier must be carried out in accordance with all (environmental) regulations
applicable in your country.
Intended Use
Agilent products must only be used in the manner described in the Agilent product user guides.
Any other use may result in damage to the product or personal injury. Agilent is not responsible for
any damages caused, in whole or in part, by improper use of the products, unauthorized
alterations, adjustments or modifications to the products, failure to comply with procedures in
Agilent product user guides, or use of the products in violation of applicable laws, rules or
regulations.
10
Agilent 8860, 8890, and 990 Micro GC Gasifier User Manual