Assembly Replacement
Before You Replace an Assembly
Before You Replace an Assembly
CAUTION
Many of the assemblies in this instrument are very susceptible to damage from electrostatic discharge (ESD).
Perform service procedures only at a static-safe workstation and wear a grounding strap.
Be sure to review the warning and caution statements described in
replacing an assembly in your signal generator.
After Replacing or Repairing an Assembly
After you have replaced or repaired an assembly, certain performance tests and adjustments may have to be performed. Please
refer to
Chapter 54, "Post-Repair Procedures," on page
assembly.
2-2
Chapter 55, "Safety and Regulatory," on page
5-1, for the list of performance tests and adjustments required for each
5-1, prior to