Honda Civic Hybrid Manual page 85

07/08/22 17:25:07 32SND620_085
Instrument Panel Indicators
Parking Brake and
Brake System Indicator
(Red)
This indicator has two functions:
1. It comes on when you turn the
ignition switch to the ON (II)
position. It is a reminder to check
the parking brake. A beeper
sounds if you drive with the
parking brake not fully released.
Driving with the parking brake not
fully released can damage the
brakes and tyres.
2. If it remains lit after you fully
release the parking brake while
the engine is running, or if it
comes on while driving, there
could be a problem with the brake
system. For more information, see
page 298 .
80
Instruments and Controls
When the engine starts and when
you press the brake pedal repeatedly,
the brake indicator (red) may come
on. If your vehicle is in good
condition, it goes off several seconds
after you release the brake pedal.
Brake System Indicator
(Amber)
This indicator normally comes on for
a few seconds when you turn the
ignition switch to the ON (II)
position. When the brake system
indicator (amber) is on, there is the
problem with the Cooperative
Control with regenerative brake,
Creep Aid System or Brake Assist
(the normal brake operates properly).
Have your vehicle checked by your
dealer. For more information, see
page 298 .
Anti-lock Brake System
(ABS) Indicator
This indicator normally comes on for
a few seconds when you turn the
ignition switch to the ON (II)
position. If it comes on at any other
time, there is a problem with the
ABS. If this happens, have your
vehicle checked at a dealer. With
this indicator on, your vehicle still
has normal braking ability but no
anti-lock function. For more
information, see page 213 .