Honda Civic Hybrid Manual page 65

07/08/22 17:22:23 32SND620_065
Installing a Child Restraint System
LOCKING CLIP
Except for European models
On vehicles without lockable retractor
fitted to the seat where the child is
positioned
When you secure a child restraint
system with a lap/shoulder belt, be
sure you install a locking clip on the
seat belt (see page 61
60
Driver and Passenger Safety
Installing a Child Restraint
System with a Lap Belt
(For some types)
To install a child restraint system in
the centre back seat with the lap belt,
route the belt through the restraint
according to the restraint system
). maker's instructions, then insert the
latch plate into the buckle.
Pull hard on the loose end of the belt
to remove any slack; it may help to
put weight on the child restraint
system while pulling on the belt.
Finally, push and pull the restraint
forward and from side-to-side to
verify that it is secure enough to stay
upright during normal driving
manoeuvres. If the restraint is not
secure, unlatch the belt and repeat
these steps.