Honda Civic Hybrid Manual page 291

07/08/22 17:52:55 32SND620_291
Changing a Flat Tyre
JACKING POINTS
8. Place the jack under the jacking
point nearest the tyre you need to
change. Turn the end bracket
clockwise until the top of the jack
contacts the jacking point. Make
sure the jacking point tab is
resting in the jack notch.
286
Taking Care of the Unexpected
WHEEL NUT WRENCH EXTENSION
Use the extension and the wheel
9.
nut wrench as shown to raise the
vehicle until the flat tyre is off the
ground.
10. Remove the wheel nuts, then
remove the flat tyre. Handle the
wheel nuts carefully; they may be
hot from driving. Place the flat
tyre on the ground with the
outside surface facing up.
BRAKE HUB
Before mounting the spare tyre,
11.
wipe any dirt off the mounting
surface of the wheel and hub with
a clean cloth. Wipe the hub
carefully; it may be hot from
driving.