07/08/22 17:31:59 32SND620_136
Accessory Power Socket
(For some types)
COVER
Pull up
To use the accessory power socket,
pull up the cover. The ignition switch
must be in the ACCESSORY (I) or
ON (II) position.
This socket is intended to supply
power for 12 volt DC accessories
that are rated 120 watts or less (10
amps).
It will not power an automotive type
cigarette lighter element.
It is recommended that only genuine
Honda Accessories are used for this
socket. Improper accessories may
cause problems.
Interior Convenience Items
If used without the engine running,
the battery may run out very quickly.
Always put the cover on when not in
use in order to prevent objects
entering into the socket.
Instruments and Controls
131