07/08/22 17:48:43 32SND620_257
Lights
3.
Remove the bulb by pulling it
straight out of the bulb holder.
4.
Push the new bulb into the bulb
holder.
5.
Reinstall the lens in place.
252
Maintenance
Replacing the Boot Light Bulb
BULBS
1.
Open the boot.
Put a cloth on the right side edge
of the boot light assembly.
Remove the boot light assembly
by using a small flat-tipped
screwdriver to pry carefully on the
right edge of the assembly.
BULB
HOLDER
2.
Pull the bulb straight out of the
holder. Push the new bulb straight
into the holder until it bottoms.
3.
Put the light assembly back into
the hole, left side first. Push on
the right side until it snaps into
place.