Honda Civic Hybrid Manual page 292

07/08/22 17:53:05 32SND620_292
12. Put on the spare tyre. Put the
wheel nuts back on finger-tight,
then tighten them in a crisscross
pattern with the wheel nut wrench
until the wheel is firmly against
the hub. Do not try to tighten the
wheel nuts fully.
13. Lower the vehicle to the ground,
and remove the jack.
Tighten the wheel nuts securely in
14.
the same crisscross pattern. Have
the wheel nut torque checked at
the nearest automotive service
facility.
Tighten the wheel nuts to:
108 N·m (11 kgf·m , 80 lbf·ft)
Changing a Flat Tyre
WING BOLT
For For
normal compact
SPACER CONE
spare tyre
tyre
Place the flat tyre face down in the
15.
spare tyre well.
16. If your vehicle has a compact
spare tyre, remove the spacer
cone from the wing bolt, turn it
over, and put it back on the bolt.
CONTINUED
Taking Care of the Unexpected
287