Honda Civic Hybrid Manual page 253

07/08/22 17:48:00 32SND620_253
Lights
TAB
CONNECTOR
Remove the electrical connector
4.
from the bulb by squeezing the
connector to unlock the tab, then
slide the connector off the bulb.
5. Remove the bulb by turning it
approximately one-quarter turn
anticlockwise.
248
Maintenance
6. Insert the new bulb into the hole,
BULB and turn it one-quarter turn
clockwise to lock it in place.
7. Push the electrical connector back
onto the bulb. Make sure it is on
all the way.
8. Turn on the front fog lights to test
the new bulb.
9. Reinstall the fog light assembly
into the bumper while setting the
tab in the bracket. Tighten the
mounting bolt securely.
10. Align the dents to the bracket and
reinstall the side cover into the
bumper securely.
Replacing a High-mount Brake
Light Bulb
(For some types)
SOCKET BULB
1. Open the boot, and remove the
socket from the light assembly by
turning it one-quarter turn
anticlockwise.
2. Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.