Honda Civic Hybrid Manual page 290

07/08/22 17:52:48 32SND620_290
EXTENSION
JACK
BOOT FLOOR LID SPARE TYRE
The tools are in the boot. Open the
3.
boot and raise the boot floor by
lifting up on the back edge. The
tool kit case is fitted on the spare
tyre.
4. Take the tool case out of the spare
tyre.
5. Unscrew the wing bolt and take
the spare tyre out of its well.
TOOL
EXTENSION
KIT CASE
Before removing the wheel nuts,
6.
remove the centre cap from the
wheel with an extension. Put a
cloth on the notch of the centre
cap, then pry it carefully with an
extension. Do not attempt to
forcibly pry the centre cap off.
NOTCH
CENTRE CAP
WHEEL NUT WRENCH
Loosen each wheel nut 1/2 turn
7.
with the wheel nut wrench.
Taking Care of the Unexpected
Changing a Flat Tyre
WHEEL NUT
CONTINUED
285