Honda Civic Hybrid Manual page 250

07/08/22 17:47:31 32SND620_250
5. Reinstall the socket into the light
assembly by turning it clockwise
until it locks.
6. Turn on the lights to make sure
the new bulb is working.
7. Reinstall the boot lining. Make
sure it is installed under the edge
of the boot seal.
8. Put the fasteners into the holes on
the side of the boot lining.
Reinstall the screws.
Replacing Rear Bulbs
(in Boot Lid)
FASTENERS
1. Open the boot.
For some types
Use the Phillips-head screwdriver
to remove the screws in the centre
of each fastener on the back of the
boot lid. Remove the fasteners
first, then pull the lining back
carefully.
BACK-UP LIGHT
BULB
TAIL-LIGHT BULB
2. Determine which bulb is burned
out: tail-light, rear fog light (on
some types), or back-up light.
CONTINUED
Maintenance
Lights
245