Configuring With The Wbm; Starting Wbm - Siemens SIMATIC RF600 Series Configuration Manual

Configuring with the WBM

The RF600 readers are equipped with a Web server that provides Web Based Management
(WBM) for configuring the readers. The connection is via Ethernet. Settings such as transmit
power, number and type of the antennas etc. can be made with the WBM. This can be
opened via a Web browser.
7.1

Starting WBM

Requirement
The reader is connected, turned on and ready for operation ("R/S" LED is lit or flashing
green) and the relevant reader has been assigned an IP address.
To achieve a good workflow with the WBM, we recommend that you use a PC that meets the
following minimum requirements:
● CPU: DualCore
● RAM: 2 GB
You can open the WBM from the following Web browsers: Microsoft Internet Explorer V10 or
higher, Microsoft Edge, Mozilla Firefox V48 or higher and Google Chrome V53 or higher.
The user interface of the WBM is designed for a screen resolution of 1366 x 786 pixels.
Procedure
Follow the steps below to start the WBM:
1. Start your Web browser.
2. Enter the IP address of the reader in the address field of your browser.
3. Confirm your entry by pressing the <Enter> key.
Result: The WBM of the reader opens.
SIMATIC RF600
Configuration Manual, 11/2018, C79000-G8976-C386-07
7
39