Transponder Processing; Editblacklist - Siemens SIMATIC RF600 Series Configuration Manual

Programming via XML interface
10.3 XML commands
10.3.3

Transponder processing

This section describes all the commands with which you can control the processing of the
transponder data. There are two ways of querying transponder data:
● Synchronous transponder command
Commands that return the transponder data in the reply frame.
The reader executes the required action once and then sends back the acquired
transponder data.
Algorithms that work with individual transponder commands such as
"Read/WritePowerBoost" and "Read/WriteRetry" are active.
● Asynchronous transponder events
"TagEventReports" are sent by the reader to the user application on the reader's
initiative.
The transponder data is acquired only by triggers of the read point. The configuration of
the reader opens up numerous options for the trigger configuration of a read point.
You specify the message content contained in the reply frames using the tag events in the
WBM. You will find more information on the tag events in the section "The "Settings -
Communication" menu item (Page 71)".
10.3.3.1

editBlackList

This command saves or removes tag EPC-IDs in/from the black list.
The black list is a filter mechanism with which transponders can be filtered out.
Transponders whose IDs are stored in the black list are ignored and not processed. The
black list is a circulating buffer with a configurable size. If all the entries in the black list are
occupied, the next new entry deletes the oldest entry.
You specify the size of the black list in the WBM. You will find more information on the black
list in the section "The "Settings - Read points" menu item (Page 52)".
Command
<frame>
<cmd>
</cmd>
</frame>
// opt → Optional: Line can be omitted.
172
<id> value_id </id>
<editBlacklist>
<sourceName> value_sourceName </sourceName>
<blackListCmd> value_blackListCmd </blackListCmd>
<tagID> value_tagID </tagID>
...
<tagID> value_tagID </tagID>
</editBlacklist>
// opt
// opt
Configuration Manual, 11/2018, C79000-G8976-C386-07
SIMATIC RF600