Diagnostics Using The Tia Portal (Step 7 Basic / Professional) - Siemens SIMATIC RF600 Series Configuration Manual
Hide thumbs
Also See for SIMATIC RF600 Series:
- System manual (506 pages) ,
- Compact operating instructions (3 pages) ,
- System manual (200 pages)
Table of Contents
Advertisement
Service and maintenance
13.1 Diagnostics
13.1.5
Diagnostics using the TIA Portal (STEP 7 Basic / Professional)
This section is intended only for S7 users (RF615R/RF680R/RF685R).
Remember that you can only run diagnostics on RF615R/RF680R/RF685R readers using
the TIA Portal.
Note
Diagnostics of the readers with the TIA Portal for PROFIBUS operation
You will find information on diagnostics of the communications module you are using for
PROFIBUS operation in the manual for the relevant communications module.
Requirements
The reader is connected to the PC via Industrial Ethernet or PROFINET.
Procedure
Follow the steps below to read out the diagnostics status of the reader using the TIA Portal:
1. Start the TIA Portal.
2. Open your existing project and change to the project view.
3. Change to the network view.
4. Right-click on the required reader and select the "Online & diagnostics" entry in the
shortcut menu.
244
Configuration Manual, 11/2018, C79000-G8976-C386-07
SIMATIC RF600
Hide quick links:
Advertisement
Table of Contents
