Getallsources - Siemens SIMATIC RF600 Series Configuration Manual

Parameter
Parameter
value_id
value_readerType
value_mLFB
value_hWVersion
value_fWVersion
value_version
10.3.2.15

getAllSources

With this command, the names of all configured read points of the reader are queried.
Command
<frame>
<cmd>
</cmd>
</frame>
Reply
<frame>
<reply>
SIMATIC RF600
Configuration Manual, 11/2018, C79000-G8976-C386-07
Type
Decimal value
0...9
Fixed values
Alphanumeric text
Alphanumeric text
Alphanumeric text
Alphanumeric text
<id> value_id </id>
<getAllSources/>
<id> value_id </id>
<resultCode> 0 </resultCode>
<getAllSources>
<returnValue>
<sourceName> value_sourceName </sourceName>
...
<sourceName> value_sourceName </sourceName>
Values Description
0...4294967295 Unique command identifier
SIMATIC_RF680R Reader type
SIMATIC_RF685R
SIMATIC_RF650R
SIMATIC_RF615R
-- SIEMENS article number of the reader
Example: 6GT2811-6AA10-0AA0
-- Hardware version of the reader
Example: V1.0.0.0_1.1.0.34
-- Firmware version of the reader
Example: V1.0.0.0_1.1.0.34
-- Reader-specific version of components
Note that the number of sub-versions
can change.
In future versions, there may be more
or less sub-versions.
Programming via XML interface
10.3 XML commands
// opt
169