Triggersource - Siemens SIMATIC RF600 Series Configuration Manual

Parameter
Parameter
value_id
value_
sourceName
value_tagID
10.3.3.3

triggerSource

Triggering the read point to trigger inventories. In this case, identified transponders are
subjected to the smoothing algorithm and can have the statuses "GLIMPSED",
"OBSERVED" and "LOST". The data of the identified statuses is sent to the user application
as a "TagEventReport".
The configuration parameters of the read point such as "Smoothing" and the definition of the
data of each transponder (tag fields, RSSI value, ...) to be sent are taken from the stored
configuration. You set this parameter in the WBM. You will find more information on
parameters in the section "The "Settings - Read points" menu item (Page 52)".
Command
<frame>
<cmd>
</cmd>
</frame>
// opt → Optional: Line can be omitted.
SIMATIC RF600
Configuration Manual, 11/2018, C79000-G8976-C386-07
Type
Decimal value
0...9
Text
Hexadecimal
value
0...9, A...F
<id> value_id </id>
<triggerSource>
<sourceName> value_sourceName </sourceName>
<triggerMode> value_triggerMode </triggerMode>
</triggerSource>
Values Description
0...4294967295 Unique command identifier
-- Read point name
The name is specified using the WBM
(refer to the section "The "Settings -
Read points" menu item (Page 52)").
In the standard configuration, there is
only one read point with the name
"Readpoint_1".
-- EPC-ID in "RAW Hex Data Format"
Example of a 96-bit EPC-ID:
3005FB63AC1F3681EC880468
For additional information, refer to the
"EPC Global Specification".
Programming via XML interface
10.3 XML commands
// opt
175