Getconfigversion - Siemens SIMATIC RF600 Series Configuration Manual

10.3.2.3

getConfigVersion

This command requests the version of the configuration stored on the reader.
Command
<frame>
<cmd>
</cmd>
</frame>
Reply
<frame>
<reply>
</reply>
</frame>
The error codes for negative replies ("resultCode" ≠ 0) are described in the section "Negative
XML replies (Page 213)".
Parameter
Parameter
value_id
value_configID
SIMATIC RF600
Configuration Manual, 11/2018, C79000-G8976-C386-07
<id> value_id </id>
<getConfigVersion/>
<id> value_id </id>
<resultCode> 0 </resultCode>
<getConfigVersion>
<returnValue>
<configID> value_configID </configID>
</returnValue>
</getConfigVersion>
Type
Decimal value
0...9
Alphanumeric text
Values Description
0...4294967295 Unique command identifier
-- Unique identifier of the transferred
configuration
Programming via XML interface
10.3 XML commands
153